Search results
Results From The WOW.Com Content Network
The S stands for "Strength". Strength is an assessment of how powerful the received signal is at the receiving location. Although an accurate signal strength meter can determine a quantitative value for signal strength, in practice this portion of the RST code is a qualitative assessment, often made based on the S meter of the radio receiver at the location of signal reception.
The internals of the TRS-80 Model 100. The left half is the back. Processor: 8-bit Oki 80C85, CMOS, 2.4576 MHz; Memory: 32 KB ROM; 8, 16, 24, or 32 KB static RAM.Machines with less than 32 KB can be expanded in 8 KB increments of plug-in static RAM modules from Radio Shack or in various capacities from 3rd party vendors.
The procedure signs below are compiled from the official specification for Morse Code, ITU-R M.1677, International Morse Code, [1] while others are defined the International Radio Regulations for Mobile Maritime Service, including ITU-R M.1170, [8] ITU-R M.1172, [4] and the Maritime International Code of Signals, [5] with a few details of their ...
Radioteletype tuning indicator Tuning indicator on cathode ray tube. Radioteletype (RTTY) is a telecommunications system consisting originally of two or more electromechanical teleprinters in different locations connected by radio rather than a wired link.
An extension of SINPO code, for use in radiotelephony (voice over radio) communications, SINPFEMO is an acronym for Signal, Interference, Noise, Propagation, frequency of Fading, dEpth, Modulation, and Overall.
[7] [10] 1203–1272 US: Discrete 1200 series codes unless otherwise allocated (for example, 1255), designated for DVFR aircraft and only assigned by a flight service station. [3] 1255 US: Aircraft not in contact with an ATC facility while enroute to/from or within the designated fire fighting area(s). [3] [11] 1273–1275 US
Crystal radio was invented by a long, partly obscure chain of discoveries in the late 19th century that gradually evolved into more and more practical radio receivers in the early 20th century. The earliest practical use of crystal radio was to receive Morse code radio signals transmitted from spark-gap transmitters by early amateur radio ...
The QN Signals are Morse code operating signals that were introduced for Amateur radio net operation in 1939 on the Michigan QMN Net to lighten the burdens of net control operators. Originally created by a committee of the Detroit Amateur Radio Association led by Ralph Thetreat, W8FX. [ 1 ]